Emergency Light Testing

Way In Building & Civil Construction

Emergency Light Testing

Emergency lighting at your residential or commercial premises is imperative in cases of fire or power failure.This type of lighting is installed to help protect family, staff, customers, and visitors and enable them to easily find emergency exits or escape routes if there is an emergency.As an employer it is your responsibility to maintain your emergency lighting and carry out regular testing with a trained engineer.This is part of the Health & Safety standards keeping occupation safe.

Of course, if your emergency lighting is not operating efficiently it must not be ignored because it could pose a hazard in future.FIXERON provides properties a full emergency light testing service using accredited lighting engineers.

All of our engineers are friendly, reliable and endeavor to complete emergency light testing efficiently.

What Testing Can You Do?

It is useful to conduct your own testing every day just to make sure emergency lighting is operating efficiently.All this entails is a simple walk around your premises and visually checking your lighting systems.Once a month, check the light switches are operating properly, this is known as a “flick test” and is when you switch lights on and off quickly.This checks batteries and fittings are fully operational. You should note whether they instantly respond.

Professional Manual Testing

We recommend booking in one of our lighting engineers to visit your premises once a year to test all emergency lighting appropriately and to make sure it adheres to the UAE standard.To conduct this test, your FIXERON engineer will implement a mains power failure on your normal lighting which will initiate your emergency lighting system through a battery supply.The testing is done manually and lasts approximately 3 hours. It usually involves one single switch cutting out the building’s power and then the tester must check the entire building.Once power is restored, the tester must re-check the entire building’s system again.There is also an automatic test but this is only applicable if you have self-testing emergency lighting installed.

Additionally, every three years, there should be a full duration discharge test which can only be carried out by a fully trained engineer.During lighting inspection and test of emergency lighting our engineers will check that your lighting meets the standard.All findings at any stage of testing will always be reported back to you and recorded appropriately in your emergency lighting logbook which is a requirement in the emergency lighting Code Of Practice.The logbook should have all the information on who installed your emergency lighting as well as a design guide and any information relating to maintenance, testing and repairs.

Convenient Light Testing

The team at FIXERON are available at your convenience so minimizing any disruption to you, your family or your business. Additionally, we guarantee all our work and we price competitively.

To find out more about Emergency Lighting Testing call FIXERON or drop us a line.

FAQ’s

Why do I need my emergency lighting tested?

It is a requirement by law (and part of the Health & Safety Standards.

Is there a difference between a maintained and a non-maintained fitting?

Yes, a maintained fitting operates as a normal light fitting, controlled together with the other lighting and if the power fails, the maintained emergency fitting continues to operate at a lower level. A non-maintained fitting is usually switched off and fully charged. This type of fitting displays a green LED (which tells you that the battery is fully charged). Upon power failure, the fitting switches on. These are usually visible on Emergency Exit signs.

What are the different types of emergency lighting?

There are various types, for example emergency escape routes which are illuminated by an Emergency Exit sign and these are required by law in a residential and commercial premise. There is also standby lighting which is part of your emergency lighting system and is used if your lighting system fails in non-emergency situation, therefore allowing you to continue with your normal routine with minimum disruption. Open area lighting is used as a lighting system to allow tenants, staff, customers, and visitors to exit a building safely if there is an emergency. High risk task area lighting is a type of lighting that allows people to escape a building when involved in a dangerous situation.

How long do emergency lights last?

Generally, 4 to 5 years but it depends on where they are located. Usually after four or five years, batteries need replacing.